Decka Plank Dakota

Decka Plank Dakota

£0.00

Decka Plank Dakota from Oakley Products, is a 240mm Wide by 14mm thick Engineered Oak Board. This board comes completely prefinished, making this board very easy and quick to install, perfect for large developments. This board is also suitable for underfloor heating.

More than just wood:

The state Dakota is known for its scenic beauty, including expansive prairies, rolling hills, and picturesque landscapes. By naming this engineered oak board "Dakota," it evoked a sense of natural beauty and tranquility, appealing to those who value aesthetics and a connection to the outdoors and also helps to describe the key features of this board, like the extra wide widths and lengths.

Also Decka Plank Dakota board is completely prefinished making it the ideal products for a quick and easy installation. While wide plank flooring is often considered contemporary, it also has a timeless quality that can complement a variety of design schemes. Whether your style is rustic, traditional, or minimalist, wide plank oak flooring can add warmth and character to any room.

Advances in engineered flooring technology mean that boards can now be longer and wider than ever. A wide floor enhances the atmosphere of a room, particularly in large spaces, and gives a modern and open feel to any space.

The ply backing of an engineered floor with a hardwood veneer glued on top gives Decka Plank Dakota the same beautiful appearance of a solid wood floor but with superior construction, greater stability, and compatibility with under floor heating.

Our engineered board has been produced using multi ply backing, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, and fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory lacquer ready to use.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Pre-Lacquered: This board has undergone 7x coats of Extra Tough Treffert UV Lacquer.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.

Additional information

Colour

Traditional Oak

Finishes

Brushed, Matt Lacquered, Prefinished

Grade

Character

Length

2200mm

Thickness

14mm

Underfloor Heating

Suitable

Width

240mm