Decka Plank Cottonwood

More than just wood:

Decka Plank Cottonwood, was names after cottonwood trees which are renowned for their light-colored wood with subtle variations in tone, often ranging from creamy white to pale yellow. which is shares similar characteristics to Decka Plank cottonwood with its light and neutral hue that brightens and opens up the space. Also Cottonwood trees typically have a fine and even texture in their wood grain, which can translate into smooth and uniform flooring, similar to smooth finish of Decka Plank Cottonwood.

Cottonwood trees grown in North America in open landscapes and airy environments due to their tall, slender trunks and delicate leaves, which helps you to picture where Decka Plank Cottonwood helps to contribute to a light and airy ambiance in your room, ideal for creating a sense of spaciousness and relaxation.

The light limed finish of Decka Plank Cottonwood creates a bright and airy ambiance in any space. The subtle whitewashed effect adds depth and dimension to the wood grain while maintaining a light and refreshing appearance, perfect for enhancing the natural light and spaciousness of a room. Also light limed oak flooring exudes a modern and sophisticated aesthetic that complements a variety of interior design styles, from contemporary to coastal. Its clean and minimalist look adds a touch of elegance to any room, creating a timeless backdrop for both classic and on-trend decor.

Oakley Products engineered oak boards are constructed with multiple layers of wood, making them more resistant to warping and movement than solid wood boards. This durability ensures that the flooring maintains its integrity and appearance even in high-traffic areas of the home, making it a practical and long-lasting investment.

Our engineered board has been produced using multi ply backing, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.

The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.

Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.

Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.

Engineered: 2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Birch Plywood. Boards can be Nailed, Stuck Down, or Floated depending on product type and sub floor. Parquet woodblocks must be stuck down. All floors are Tongue and Groove with Ends Matched unless stated otherwise.

Floating: A floating floor is not physically connected to the sub floor. Normally laid on an underlay, the floor is joined by gluing the tongue and groove together or by using a click system.

Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.

Nail Fitting: Nail fixing is usually done via a nail gun, e.g. Porta-Nailer, where a serrated nail is inserted through the tongue at 45 degrees.

Pre-Lacquered: This board has undergone 7x coats of Extra Tough Treffert UV Lacquer.

Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.

Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.