Decka Plank New Hampshire Herringbone
Decka Plank New Hampshire Herringbone
£0.00
Decka Plank New Hampshire Herringbone 600 x 125 x 14/4mm – Brushed & Natural Oiled, Character Grade
Please note the blocks vary slightly in appearance as some photos were taken indoors.
Micro Bevelled: Micro Bevelled means a very small v shape can be seen on the long sides of the boards. The ends have no bevel.
Pre-Oiled: This product is supplied with a Factory UV Oiled surface. Oakley Products recommends that an additional coat of oil is applied to the surface prior to regular use.
Stick Down: Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor.
More than just wood:
New Hampshire is known for its picturesque rural landscapes, charming small towns, and historic architecture. Naming our traditional oak oiled flooring "Decka Plank New Hampshire" exudes rustic charm, authenticity, and timeless elegance, reminiscent of the state's traditional homes and historic building. Decka Plank New Hampshire has become a talking point as it sparks conversation about regional identity, aesthetic appeal, and curiosity. Adding depth and personality to the flooring, creating a memorable and meaningful feature within your home.
Oakley Products engineered wood floors are constructed with multiple layers of wood that are bonded together under heat and pressure. This construction makes it highly durable and resistant to warping, buckling, and other forms of damage that can occur with solid wood floors. The oiled finish also provides a protective layer that helps to guard against scratches, stains, and spills.
Our engineered board has been produced using multi ply backing, manufactured to European standard EN 326-2. The adhesive used to bond the board is an E1 category, PUR adhesive (formaldehyde free) to DIN/EN 14257 and DIN/EN 204 low emission glue which is heat and water resistant in accordance with BS EN 14342:2005+A1. The top layer is kiln dried to between 8-12% moisture content.
The formaldehyde emissions are: 0,01 ppm, pentachlorophenol emissions: <0.8 mg/kg.
Thermal conductivity (W/mK) is 0,10W/mK.
Suitable for secret fixing to ply, battens or joist subfloor, floating on an underlay or a fully bonded installation to a screed subfloor. The board is supplied with a micro bevel along the length of the board, factory Oiled ready to use
*if the product is being laid in a high traffic environment then an additional coat of oil is recommended.
Compatible for use in conjunction with underfloor heating the board complies with BS 8201:2011, rated in accordance with BS EN 13501-1, and is classified D fl -S1 when laid as a fixed floor on a structural subfloor or E fl- S1 when laid on battens or joists for minimal smoke production.
Under Floor Heating: This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees Celsius at the floor surface.
